SMR LOCKSMITHS LTD - CALL NOW
020 8819 1457
South West London despatch point: 21 Becmead Avenue, SW16 1UN, London

Electro-mechanical evolution makes ongoing training for locksmiths more important than ever.

Added by: SMR Locksmiths Ltd, on: 11th September 2017

Surge in electro-mechanical hardware and integrated building systems means locksmiths need ongoing training in more areas than just the mechanics of the locks, says Allegion UK Commercial Leader Pete Hancox.

In the UK, locksmiths come from all walks of life, taking a variety of routes to join the trade. Ask any locksmith about how he or she got started, and then go and ask another, and you will more than likely get two different answers – whether it was via supplier-led training courses, a locksmithing apprenticeship, being an understudy to a practicing locksmith or through traditional employment.

Why is this? Partly, it is because, until very recently, the locksmith profession lacked a nationally recognised qualification, which the Master Locksmiths Association (MLA) recognised.

Although MLA was the first to offer a recognised apprenticeship, it took a significant amount of time for the government to recognise locksmiths as a profession. As of June 2017, details are still being finalised between the MLA and the government to re-develop a ‘trailblazer apprenticeship’.

This is in stark contrast to other professions where wellbeing is concerned. Take gas engineers, for instance. Gas engineers in the UK, according to leading jobs website reed.co.uk, must have relevant qualifications, usually an NVQ Level 3 in Gas Installation, and also be Gas Safe registered. Apprenticeship is a common route for attaining a gas engineer position, too.

This lack of regulation has given existing locksmiths a very diverse range of skillsets and experience. Of course, diversity is welcome, and diversity is known to bring outside-of-the-box solutions. However, when we start comparing the two professions, we can start to see how gas engineers will be ‘singing from the same hymn sheet,’ whereas our locksmiths could be working from all manner of different pages.

For the future of locksmithing, this very diversity could potentially be harming our buildings and our occupants’ wellbeing, as opposed to aiding them. We could be creating an environment where knowledge levels, procedures, best practices and the way building hardware solutions are selected are all different and varied.

While it could be years before we reach a standardised route similar to that of gas engineers, we should at least be encouraging our locksmiths to complete ongoing training, particularly to keep pace with daily developments.

The Electro-Mechanical Game Changer

We are now coming to a stage in the door hardware industry where development is rapidly overtaking existing knowledge. Electro-mechanical ‘smart’ hardware means the ability to unlock doors from phones, control access to secure areas and remotely lockdown, are all feasible and affordable functions which are being sought after by building managers.

Fully integrated building solutions and biometrics are also becoming more commonplace, and forward-thinking estates managers and architects will be thinking about scalability for the future.

In the face of this surge in development, which by no means will saturate as technologies get ever more clever, locksmiths are now faced with a real problem. If they do not train in these new technologies and learn new skills, they face becoming dinosaurs that do not understand the complex natures of electronically controlled doorways and buildings.

Ultimately, without a proper understanding, it can impact health and safety as well as compliance.

A case in point happened as recently as 2016, when a fire door in a hospital that was fitted with a self-closing device shut on an elderly patient, causing injury. Unfortunately, this injury contributed to that patient’s death. Intended to be an aid for the door, it has instead caused accident and tragedy.

After the case, the Department of Health suggested that risk assessments should be carried out on all fire door closing devices to assess appropriate closing times, taking into account the occupancy of the building. For locksmiths who are ‘self-taught’ and have little knowledge in these electro-magnetic devices and risk assessments, we can immediately see how ongoing training in this area will benefit them.

Health, Safety and Security Compliance – The Unwritten ‘Duty of Care’

In many commercial cases, it is the role of the facilities manager, or representative of the estate, to guarantee the health and safety and security of occupants, and there are strict guidelines and classifications to door hardware that must be met.

However, the varying level and difference in understanding of door hardware across both facilities managers and locksmiths leads to different ideas between the two parties. The former may be constrained by budgets and ‘the bigger picture,’ while the latter may focus on single aspects of doorways and locks, particularly if they are not acclimatised to electro-mechanical systems that are in place or being planned.

These blurred lines can be difficult to navigate, and health and safety can be compromised if one party or the other is negligent in their ‘Duty of Care,’ which is another unwritten code of conduct.

Take lockdown situations for example – a popular topic given the amount of security issues we are now accustomed to seeing in the media.

In the US, many schools are more accustomed to drilling students and staff on lockdown procedures and may also be advised on lockdown hardware. It is less common in the UK, but our access control systems are now ready to combat these situations, if required.

For the un-initiated locksmith though, there may be skills gaps which cannot be plugged – and this can lead to improper solutions, or even botched jobs. When faced in a lockdown situation, if there is a fault in the locking systems, this can be life-threatening.

When botched jobs do happen, it then becomes a story of whose duty of care it is to maintain the working order of the building and the locks – has the locksmith correctly set the locking devices, or have they set them to what they think is the correct setting, when it actually is not for that building’s particular use? Who is liable?

An unfortunate case whereby duty of care of the locksmith was called into question happened in 1981 in the US, way before our hardware was as technologically advanced as it is today.

Lori Einhorn was unfortunately assaulted during a visit to her then fiancé Kenneth Einhorn’s flat by an assailant who was not a tenant of the building. The case was brought against the building landlord David Seeley and locksmith REM Discount Security Products. The claim was that the front door lock on the building was allegedly broken to an extent where it could be opened “with a firm push, even when locked,” and that as installers of the lock, REM allegedly had a duty of care to the plaintiffs for their faulty installation.

In the end, the judge ruled that REM did not have a duty of care or liability towards Lori Einhorn, as, amongst others, these was no special relationship between her and the locksmith.

However, we can start to see where locksmiths may get embroiled in complex cases of liability, particularly with electro-mechanical access control hardware where there are many stakeholders in the process.

Short-term Costs, Long-term Gains

As with all training, there is an associated cost. It can be hard to see past this cost if benefits are viewed as minimal or not even applicable to current situations. For locksmiths who have conventionally worked purely in mechanical locks, it is even harder to see why they themselves will need training in disciplines such as biometrics or computer-aided systems, when traditionally these applications have only been used in select, sensitive buildings.

However, we as manufacturers are constantly exploring technology that can enhance door hardware capabilities and the customer experience, simply because we believe in innovating for the better. Technologically enhanced door hardware will soon be more accepted as the norm as we become accustomed to the benefits it offers, as well as if costs on such hardware continues to fall.

Therefore, if we do not encourage our locksmiths to train, in the end we are ultimately costing more to our buildings, and to the welfare of our occupants.

Quick response local locksmith call us now on:

020 8819 1457

More articles from the blog

10th December 2018
Vanderbilt integrates Aperio® with latest ACT Enterprise access control solution

Vanderbilt, a leading provider of state-of-the-art security systems, has integrated the Aperio® wireless locking technology from ASSA ABLOY Access Control with its new ACT Enterprise platform. The decision by Vanderbilt to integrate products from ASSA ABLOY Access Control’s leading Aperio® portfolio with ACT Enterprise will enable customers to easily add mechanical locks to their access control system. […]

Read More
12th November 2018
Squire’s new Inigma BL1 takes gold

It’s the trailblazer for Squire’s new high security electronic locks and cylinders technology launched at IFSEC, which features Squire’s new digital security system called Inigma.

Read More
1st November 2018
SMARTair® now available through ASSA ABLOY Access Control

The easy-to-manage SMARTair® system is now available to professional security installers from ASSA ABLOY Access Control, a UK division of ASSA ABLOY, the global leader in door opening solutions. SMARTair® is an effective, fully-scalable access control system that can be installed quickly and easily by security installers. Available in offline and wireless online versions, SMARTair® is a flexible, […]

Read More
23rd October 2018
Yale becomes first manufacturer certified by Element under new STS218 scheme

Yale Door and Window Solutions has become the first manufacturer to be certified by Element Materials Technology (Element) under the new STS218 letterplate security scheme. The scheme, which tests letterplates for burglar resistance, anti-corrosion and durability, is a recent addition to the testing offering at Element’s supersite in Wednesbury, UK. It certifies to TS008 standard, […]

Read More
1st October 2018
Homeowners unaware insurance premiums raised by lower-quality locks

Many UK homeowners don’t realise that failing to include locks which meet British Standards can invalidate an insurance policy or lead to higher premiums. National Home Security Month in October reminds us all, however of the importance to remember that while searching for home insurance quotes, insurance companies will ask for details about the type […]

Read More
31st January 2018
Dark winter nights are no match for the ERA Fortress

With the cover of darkness giving criminals a significant advantage during the winter period, the Fortress cylinder lock from security specialist, ERA, provides merchants and traders with the opportunity to offer customers ultimate peace of mind that their homes are protected against break-ins this winter.   Featuring six hardened high security pins, the lock offers […]

Read More
20th December 2017
Merry Christmas!

Christmas is our favourite time of year The sights, the sounds, the happy tear Joyous wishes do abound Goodwill to all mankind…

Read More
10th December 2017
Window Press Bolt install

Window Press Bolt installation for residential customer in London. What is a Window Press Bolt and what they do? Window press bolt can be used on all internal and external doors, French windows and cupboards to strengthen your security. Very easy to operate – just press the spring-bolt to lock and use the key to […]

Read More
10th November 2017
High security nightlatch fitted and new keyless entry system installed.

High security nightlatch lock fitted and new keyless entry system installed for a residential customer in Streatham, London. Juggling bags of groceries while fishing for your keys is a frustration most people have experienced at one time or another. Holding a squirming child in your arms as you struggle to get the door open only […]

Read More
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram